Versamove Electric Pallet Transfer
Versamove Standard
Versamove Standard Electric is the most compact of the Versamove systems. It offers fully electric functional units and affordable curve modules. Due to the specially developed 45 mm aluminium profile for the basic structure of the entire system, it is also compatible with other systems and workpiece carriers available on the market.
Versamove Standard Electric transports workpiece carriers from 240 x 240 to 400 x 400 mm, with custom dimensions or dimensions in 80 mm intervals possible. The system can move pallets weighing up to 40 kg. The special feature of this system is its affordable curve modules, which are equipped with a flat top chain or, for compact curves in tight spaces with a round belt.
Overview of the Modules
- Total load per workpiece carrier: up to 40 kg
- Workpiece carrier sizes: width 240, 320, 400 mm; length 240, 320, 400 mm
- Conveyor types: flat top chain, timing belt, accumulating roller chain
- Special features: curved
- Functional units: fully electric
- Conveyor frame cross section: 100x 45 mm
For Efficient and Environmentally Friendly Process Automation
The functional units, HQZ lift-and-transfer conveyor, HDE lift-and-rotate unit, PE lift-and-locate unit and SU/SD stoppers are also now available in fully electric variants. This completely eliminates the need for a compressed air supply. This version can be retrofitted into existing Versamove systems with ease. Depending on whether you already have pneumatic infrastructure, it may make more sense to replace the modules with electric ones gradually or in one go.
Example Versamove Accessories
ZRF-P 2045 Timing Belt Conveyor
- Ideal for cycle operation
- High speeds and acceleration
- Quieter operation compared to other conveyor types
- Low-maintenance
- Reverse operation possible
- Antistatic design optional
- Length: 600-6000 mm
- Total load: 200 kg
- Speed: up to 30 m/min
- Drive variants
- Timing belts
SRF-P 2045 Accumulating Roller Chain Conveyor
- Ideal for accumulated operation
- Optimal for heavy loads
- Higher operating temperatures possible
- Accumulating rollers available in steel or plastic
- Automatic tensioning station included
- Antistatic design optional
- Length: 600-6000 mm
- Total load: 500 kg
- Speed: up to 30 m/min
- Drive options
- Accumulating roller chains
FPF-P 2045 Flat Top Chain Conveyor
- Suitable for accumulated operation
- Curved from a minimum radius of 600 mm
- 90° and 180° curves with a drive
- Automatic tensioning station included
- Antistatic design optional
- Length: 500-6000 mm
- Total load: 400 kg
- Speed: up to 18 m/min
- Drive options
- Flat top chain
WT 2045 Workpiece carrier
- Aluminium support plate (steel optional)
- Positioning sockets in the support plate for positioning and rotating the workpiece carrier
- PE wear strips (steel optional)
- Integrated bumper
- Antistatic design optional
- Total load up to 40 kg
- Width and length: 240, 320, 400, 480 mm
HQZ 2045 electric Lift and Transfer Unit (Corner Transfer Conveyor)
- Low height
- 14 mm lift motion with stepper motor via eccentric
- Guided by linear roller bearings and guide rods
- Inductive position detection
- Stopping via wear strip with stop edge
- Loads up to 40 kg
- Speeds 10 m/min
HDE 2045 electric Lift and Rotate Unit
- Low height
- 16 mm lift motion with stepper motor via eccentric
- Guided by linear roller bearings and guide rods
- Inductive position detection
- Rotation 90° steps
- Loads up to 40 kg
PE 2045 electric – Lift and Locate Unit (Positioning Unit)
- Low height
- 5 mm lift motion with stepper motor via eccentric
- Guided by linear roller bearings and guide rods
- Positioning in the X, Y and Z directions
- Positioning sockets in the workpiece carrier’s support plate for positioning
- Inductive position detection
- Repeatability: ± 0,2 mm
Stopper undamped SU electric / damped SD electric
- Damped and undamped stopping
- Electrical or inductive stopper detection possible
- Dual acting
- Direct mounting on the conveyor frame (no additional holders required)
- Permissible load depends on the stopper variant and the conveying speed
KER 2045 Compact Curve Unit
- 90° and 180° in the smallest space (other angles possible on request)
- Particularly suited to parallel conveyor lines that are positioned close to one another
- Replaces lift-and-transfer units and lift-and-rotate units (workpiece maintains its orientation)
- Available with its own drive or can be driven by the adjoining line
- Medium of transport: round belt
WTZ 2045 Maintenance Access
- Conveyor folds up to allow easy access to interior space
- Fast and safe maintenance
- Pneumatic springs prevent conveyor from falling back
- Safety interlock protects against unauthorised access