Versamove Pallet Transfer System
Versatile Workpiece Carrier Circulation System
Versamove Standard
Versamove Standard stands out as the most space-efficient among the Versamove systems. It provides cost-effective curve modules and is adaptable to market-compatible systems and workpiece carriers. This adaptability is facilitated by our dedicated 45 mm aluminium profile, serving as the foundational element for the entire system. As a result, seamless integration with existing systems is achievable.
- Total load per workpiece carrier: up to 40 kg
- Workpiece carrier sizes: width 240, 320, 400 mm; length 240, 320, 400 mm
- Conveyor frame cross section: 100×45 mm
- Conveyor types: flat top chain conveyor, timing belt conveyor, accumulating roller chain conveyor
- Special features: curved
Versamove Plus
The Versatile Solution for Workpiece Carrier Systems
Versamove Plus stands as a versatile transfer system for workpiece carriers, boasting a substantial load capacity of up to 150 kg/m and 100 kg per workpiece carrier. This system efficiently transports workpieces of various dimensions within the prescribed limits of 400 x 400 mm to 800 x 1040 mm. Customized workpiece fixtures are incorporated based on customer specifications.
- Total load per workpiece carrier: up to 100 kg
- Workpiece carrier sizes: width from 400 to 800 mm; length from 400 to 1040 mm
- Conveyor frame cross section: 100 x 50 mm
- Conveyor types: timing belt conveyor, chain conveyor, accumulating roller chain conveyor
- Special features: various workpiece carrier sizes
Versamove Ultra
The Workpiece Carrier System for Large and Heavy Products
The Versamove Ultra pallet transfer system is well-suited for exceptionally heavy loads and large products, boasting a remarkable load capacity of up to 300 kg/m and 300 kg per workpiece carrier. This system efficiently transports workpieces of diverse dimensions within the specified limits of 600 x 600 mm to 1200 x 1200 mm. Customized workpiece fixtures are integrated based on customer specifications.
- Total load per workpiece carrier: up to 300 kg
- Workpiece carrier sizes: width from 600 to 1200 m; length from 600 to 1200 mm
- Conveyor frame cross section: 135×60 mm
- Conveyor types: accumulating roller chain conveyor
- Special features: very high load capacity
Example Versamove Accessories
Pallets/Workpiece Carriers
- Aluminium support plate (steel optional)
- Positioning sockets in the support plate for positioning and rotating the workpiece carrier
- PE wear strips (steel optional)
- Integrated bumper
- Antistatic design optional
- Total load up to 40 kg
- Width and length: 240, 320, 400 mm
Lift and Transfer Conveyor
- Low height
- Pneumatic lifting motion (20 mm)
- Guided by linear roller bearings and guide rods
- Manual tensioning device included
- Inductive position detection (reed contact optional)
- Top cover available as stainless steel sheet or clear polycarbonate.
- Loads up to 40 kg
- Speeds of 6; 9; 12; 15 and 18 m/min
Damped & Undamped Stoppers
- Damped and undamped stopping
- Electrical or inductive stopper detection possible
- Single or dual acting
- Direct mounting on the conveyor frame (no additional holders required)
- Permissible load depends on the stopper variant and the conveying speed
Positioning Unit (Lift and Locate Unit)
- Positioning in the X, Y and Z directions
- Positioning sockets in the workpiece carrier’s support plate for positioning
- Pneumatic lifting and positioning
- Repeatability: ± 0.1 mm
Short Stroke Lift Unit
- Travel to two transport heights
- Pneumatic lifting and lowering
- Continuously adjustable speed
- KTF, ZRF and SRF conveyor types possible (ZRF shown here)
Maintenance Access
- Conveyor folds up to allow easy access to interior space
- Fast and safe maintenance
- Pneumatic springs prevent conveyor from falling back
- Safety interlock protects against unauthorised access
